Features：
● The 3-WAY BALL VALVES allows two flow patterns, using one valve. The valve is suitable for a pipeline which requires two ball valves and a tee. That is, the 3-WAY BALL VALVES is economic because it makes piping compact and saves space.
● Full flow design, PN10.
● Existing cases show that due to factors such as installation errors in factory pipelines, it is easy to cause the union nut to be overstressed and leak or even be damaged. Therefore, it is not recommended to use a valve with a union connection structure above DN50.
Parts&Material
|
No. |
Parts |
Materials |
|
1 |
Handle |
ABS |
|
2 |
Stem O-ring |
EPDM,FPM |
|
3 |
Stem |
PPH,UPVC,CPVC,PVDF |
|
4 |
Body |
PPH,UPVC,CPVC,PVDF |
|
5 |
Ball seal |
PTFE |
|
6 |
Ball |
PPH,UPVC,CPVC,PVDF |
|
7 |
Ball seal |
PTFE |
|
8 |
Seat O-ring |
EPDM,FPM |
|
9 |
Inside plug |
PPH,UPVC,CPVC,PVDF |
|
10 |
Union nut |
PPH,UPVC,CPVC,PVDF |
|
11 |
Joints |
PPH,UPVC,CPVC,PVDF |
Dimensions Table For Horizontal Type（mm）
|
DN |
d |
Z |
L |
Working pressure(Mpa) |
|||||||
|
Socket end |
Thread end |
||||||||||
|
HG/DIN |
JIS |
ANSI |
HG/DIN |
JIS |
ANSI |
FRPP/PPH |
UPVC/CPVC |
PVDF |
|||
|
32 |
40 |
38 |
42.2 |
R1-1/4 |
PT1-1/4 |
NPT1-1/4 |
29 |
205 |
1.0 |
1.0 |
1.6 |
|
40 |
50 |
48 |
48.3 |
R1-1/2 |
PT1-1/2 |
NPT1-1/2 |
35 |
218 |
1.0 |
1.0 |
1.6 |
If you need other sizes of three-way ball valve, please contact us
years of
experience
M2
Built-up area
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
NEWS CENTER
We aim to meet all our customers’ request by good quality and service. Welcome your inquiry and visits!
Automatic Butterfly Valve Overview In the field of industrial fluid control, the cost of an Electric Actuated Butterfly Valve is not a simple figure but a complex variable influenced by multiple technical specifications. Understanding these cost components not only helps in optimizing budgets but al...
Manual ball valves are mechanical devices that control the flow of fluids through a pipe by using a hollow, perforated, and pivoting ball. By rotating the handle or handwheel 90 degrees, the operator can align the hole with the flow or position it perpendicularly to shut off the flow. As a fundament...
1. Core Definitions and Operating Mechanisms In fluid control systems, ball valves are widely used due to their simple structure and excellent sealing. Based on the control method, they are primarily divided into Manual Ball Valves and Actuated Ball Valves. 1.1 Manual Ball Valves The manual ball val...
In the field installation of industrial fluid control systems, the orientation of an automatic Butterfly Valve is a critical factor that dictates the long-term stability of the system. Many engineers prioritize piping layout while overlooking the profound impact that the Stem axis orientation has on...
In the world of industrial fluid control, a common pitfall in system design is the assumption that an automatic Butterfly Valve must share the same nominal diameter as the existing pipeline. While this "one-size-fits-all" approach simplifies installation by avoiding the use of reducers, it frequentl...
Socket (Slip) Connection Socket connection is one of the most common methods for ROUND PVDF EQUAL TEE. Each end of the tee is slightly enlarged to form a socket, into which the pipe is inserted. Adhesive or heat fusion is then used to secure the joint. This connection provides good sealing performan...
Skype : lmzhbb